Plumber kit and PPE

This is the kit a plumber usually needs on site; the site's own risk assessment decides the rest. If that assessment says you need PPE, your employer must provide it free, and since 6th April 2022 that covers workers as well as employees. Each item says what marking to look for and what it means.

The kit, and the marking to look for

  • Safety boots

    BS EN ISO 20345, the safety footwear standard; HSE doesn't explain the S1P and S3 codes in it.

  • Hard hat

    EN 397 for work on the ground; HSE's tree work guidance points work off the ground to EN 12492.

  • Hi-vis

    Class 1, 2 or 3 on the label; class 3 is the easiest to see, and roads need class 2 or 3.

  • Safety glasses and goggles

    A UKCA or CE mark; goggles seal all round, and vented ones may not stop gas or fine dust.

  • Work gloves

    EN 388 means protection from mechanical hazards such as cuts; EN 374 means chemicals or wet work.

  • Knee pads

    HSE names no marking or standard for knee pads; it lists them as a way to cut the risk from kneeling.

Where these facts come from14 sources

This is a check against published rules, not legal or tax advice. If you're in a dispute, ACAS, a union or an adviser can act for you.