Hard hats: EN 397 or EN 12492?

On a construction site your employer must do all it reasonably can to make sure you wear suitable head protection, unless there is no foreseeable risk of a head injury. HSE says bump caps aren't enough where things can fall. Use the chinstrap if it has one, and throw the helmet away after a hard knock.

What to know

  • The marking to look for

    Look for EN 397, the standard gov.uk names for industrial protective helmets. HSE's tree work guidance says EN 397 helmets are only recommended for work on the ground, and for climbing it recommends a mountaineering-style helmet to EN 12492. HSE doesn't set out the technical differences, and the standards are sold, not published.

  • When to replace it

    As a general guide HSE says replace an industrial safety helmet three years after it was made, but check with the maker, and throw one away after a hard knock.

  • Don't customise it

    Don't make your own air holes in it, paint it, mark it or put stickers on it.

  • Sikh workers

    Turban-wearing Sikhs are exempt from wearing safety helmets at work, with limited exceptions for high-risk tasks.

Where these facts come from4 sources

This is a check against published rules, not legal or tax advice. If you're in a dispute, ACAS, a union or an adviser can act for you.