Safety boots: S1P or S3?

Safety boots normally have protective toecaps, and may also have slip-resistant soles and midsoles that stop nails coming through, HSE says. Building work brings a real risk of crushed toes and of treading on nails. The S1P and S3 codes come from the safety footwear standard, which HSE's guidance doesn't explain.

What to know

  • The marking to look for

    Look for BS EN ISO 20345, the safety footwear standard named on gov.uk. S1P and S3 are codes set out in that standard. HSE and gov.uk don't explain them, and the standard itself is sold, not published, so we don't copy it here. Ask the seller which hazards the code on a boot covers.

  • No such thing as non-slip

    HSE says there is no such thing as non-slip footwear; anti-slip soles only make slipping less likely on some floors.

  • Check them before use

    Look for wear and loose seams before you put them on, replace broken laces and clear out anything stuck in the tread.

  • Free if you need them

    If a risk assessment says you need safety boots, your employer must provide them free, and can't charge you for replacing them.

Where these facts come from3 sources

This is a check against published rules, not legal or tax advice. If you're in a dispute, ACAS, a union or an adviser can act for you.