Dust masks: FFP2 or FFP3?

For construction dust HSE says to ask for an FFP2 or FFP3 mask, and FFP3 is the one to use for work that does or could make high dust levels. A mask works only if it seals tight to your face, so you need a face fit test to find one that fits you.

What to know

  • The marking to look for

    FFP2 or FFP3 on the mask is the performance type HSE says to ask for with construction dust. HSE says masks used at work must be CE marked, but that a CE mark alone doesn't make a mask right for your job.

  • Beards and stubble

    Stubble and beards make it impossible to get a good seal, so be clean-shaven when you wear a tight-fitting mask.

  • One fit test per mask type

    If you wear more than one type of tight-fitting mask, each type needs its own fit test.

  • Why it matters

    HSE believes over 500 construction workers die every year from exposure to silica dust, which can cause lung cancer.

Where these facts come from5 sources

This is a check against published rules, not legal or tax advice. If you're in a dispute, ACAS, a union or an adviser can act for you.